CIJECT SC Accessories

Pre-made silicone ‘X’ junction resin runner with mould insert, incorporating a keyhole channel for resin distribution.

Pre-made 1 m silicone resin runner with moulded insert, incorporating a keyhole channel for resin distribution.

Pre-made 1 m silicone resin runner, incorporating a keyhole channel for resin distribution.

Pre-made 20 cm silicone resin runner with moulded insert, incorporating a keyhole channel for resin distribution.

Silicone fitting used to introduce resin into a mould or for vacuum connection. Designed for use with 12 mm pipe.

12 mm aluminium threaded injection fitting, used to introduce resin into a mould or to connect a vacuum supply.

3/4” BSP aluminium threaded insert with brass locking back nut. Provides a vacuum/injection connection during the manufacture of a silicone bag. Also suitable for in-mould pressure sensors (IMPS).

Plastic cap for protecting Injection and vacuum mould inserts.

Steel lifting eye to be moulded into silicone for lifting a manufactured silicone bag.

Sponge silicone foam profile used to manufacture a vacuum channel during the mould making process.

Sponge silicone profile to form a resin runner spacer during the mould making process.

5 cm wide orange non-stretch polyester reinforcing cloth. Used in silicone bag manufacturing to reinforce edges, support beam bonding and maintain shape under vacuum and heat.

10 cm wide orange non-stretch polyester reinforcing cloth. Used in silicone bag manufacturing to reinforce edges, support beam bonding and maintain shape under vacuum and heat.

Acrylic based double sided tape used to bond and seal silicone bag seams, ensuring vacuum integrity during composite curing. It offers reliable adhesion under high temperatures and repeated use.

1.5 mm thermal-stable calibration wax, used to create precise gaps or profiles during moulding. It ensures consistent thickness and is easily removed after curing.

Soft filleting wax used to form clean, precise radii and edge profiles during silicone bagging and composite tooling. It can be shaped easily and is removable after curing.

High quality two-part platinum silicone with a viscosity ideally suited for use with CIJECT SC machines. Suitable for use with thixotropic additive.

PA40 retarder agent used to extend silicone curing time from 3 minutes up to a maximum of 20 minutes.

Thixotropic additive used to increase the viscosity of mixed silicone to a paste consistency. This can be hand mixed or dispensed automatically on demand using the CIJECT SC4 machine.

A high performance semi-permanent release agent which provides reliable, high-temperature barrier between silicone bags and composite parts or moulds. Ensures easy demoulding and repeated use in curing and lay-up processes.