Contact Us
Contact Us

Direct Infusion Accessories

30L Resin Catch Pot

30L RESIN CATCH POT

Part No: XV-0500
30 litre fabricated steel vacuum catch-pot for use in Direct Infusion processes, or as an inline resin trap between a VRTM mould and a CIVAC vacuum system.
20mm Catch-Pot Assembly 1xGEKA

VACUUM CATCH POT

Part No: XE-0211
2 litre stainless steel vacuum catch-pot with clear acrylic lid, EPDM vacuum seal, and 3/8″ BSP port for optional vacuum connectors.
Resin Trap Assembly 1xGEKA

INLINE RESIN TRAP

Part No: XE-0213
2 litre stainless steel inline resin trap with clear acrylic lid, EPDM vacuum seal, and 3/8″ BSP port for optional vacuum connectors.
IMPS READOUT UNIT

IMPS READOUT UNIT

Part No: XE-0053
IMPS Readout Unit engineered to provide sensor power and display pressure readings in bar. Monitors pressure conditions inside the mould, providing accurate and reliable real-time pressure data.
IMPS 0 to 4 bar (ABS) MIL SPEC CONNECTOR (Face-View)

IMPS SENSOR 0 to 4 Bar (ABS)

Part No: XE-0050-008
0 to 4 bar (ABS) in-mould pressure sensor designed to provide in-mould feedback control to CIJECT injection/infusion machines. Used with either 12 mm or 15 mm IMPS adaptors.
IMPS LEAD ASSEMBLY (3/10/25M)

IMPS LEAD ASSEMBLY (MIL-SPEC CONNECTOR)

Part No: XE-0060-05 / XE-0060-06 / XE-0060-07
Sensor cable used to connect a sensor with a MIL-spec connector directly to a CIJECT machine IMPS input or an IMPS Readout Unit. Connectors include 3–pin IMPS plug to 6–pin MIL-spec socket. 3/10/25 metre lengths available.
INFUSION MANIFOLD

INFUSION MANIFOLD

Part No: MP-43-1212-04
Manifold with 2 x 1/2” BSPF inlet and 4 x 1/2” BSPF outlet ports. Designed to connect to a single outlet from a CIJECT machine and enables multiple inlets to be connected to large infusion moulds.
15mm STEM ADAPTOR

1/2″ BSP STEM ADAPTOR

Part No: MP-04-0815
1/2” BSP x 15 mm plastic/delrin adaptor. Used as a connector to link multiple manifolds if required, to create more outlets in an infusion set-up.
1-2 BSP BLANKING PLUG

1/2″ BSP BLANKING PLUG

Part No: MP-46-0012
1/2” BSP mild steel blanking plug used to seal outlets on the manifold when not in use.
12&15mm STRAIGHT ADAPTOR

12mm STRAIGHT ADAPTOR

Part No: MP-01-1212-JG
1/2” BSP straight adaptor for the manifold. Designed to convert 1/2” BSP thread to a 12 mm metric pipe, connecting the manifold outlet to 12 mm nylon pipe.
12&15mm STRAIGHT ADAPTOR

15mm STRAIGHT ADAPTOR

Part No: MP-01-1512-JG
1/2” BSP straight adaptor for the manifold. Designed to convert 1/2” BSP thread to a 15 mm metric pipe, connecting the manifold outlet to 15 mm nylon pipe.
15mm-12mm REDUCER

15mm – 12mm REDUCER

Part No: MP-08-1512-JG
A reducer push fitting designed to convert a 15 mm metric pipe connection down to 12 mm. Used to connect different sized metric pipe to support different infusion configurations.
15mm ELBOW PUSH FITTING

15mm ELBOW PUSH FITTING

Part No: MP-05-1515
A 15 mm tee fitting which joins two equal sized pipe connections to form a 90° pipe bend.
DI ACIT10PP 10mm TEE FITTING (for 12mm OD Pipe)

10mm TEE FITTING (for 12mm OD Pipe)

Part No: DI-ACIT10PP
A 10 mm tee fitting which joins three equal sized metric pipe connections, for use with 12 mm OD pipe.
12mm TEE PUSH FITTING

12mm TEE PUSH FITTING

Part No: MP-06-0012-JG
A 12 mm tee push fitting which joins three equal sized metric pipe connections. Used in conjunction with an IMPS adaptor to link in-mould pressure sensors (IMPS) to the infusion set-up.
15mm TEE PUSH FITTING

15mm TEE PUSH FITTING

Part No: MP-06-0015-JG
A 15 mm tee push fitting which joins three equal sized metric pipe connections. Used in conjunction with an IMPS adaptor to link in-mould pressure sensors (IMPS) to the infusion set-up.
15mm ISOLATION VALVE FITTING

15mm ISOLATION VALVE FITTING

Part No: MP-59-0106
A shut off valve with 15 mm push fit connections on both sides. An alternative method to inline clamps, designed to improve shutting of feed lines and flow regulations.
REUSABLE INLINE CLAMP

REUSABLE INLINE CLAMP

Part No: MP-85-0015
Reusable clamp mechanism designed to shut off resin feed lines by compressing the pipe lines. An alternative method to the isolation valve fitting, designed to improve shutting off feed lines and flow regulation.
12mm IMPS ADAPTOR

12mm IMPS ADAPTOR

Part No: XA-0036-12
Adaptor for an in-mould pressure sensor (IMPS) which converts 12 mm metric pipe to 3/4” BSP female thread, to connect IMPS to the infusion set-up.
15mm IMPS ADAPTOR

15mm IMPS ADAPTOR

Part No: XA-0036
Adaptor for an in-mould pressure sensor (IMPS). Fitting converts 15 mm metric pipe to 3/4” BSP female thread to connect IMPS to the infusion set-up.

Request A Quote

Use our online form to let us know which products your are interested in, and a member of our team will be in touch with your quotation.

Get A Quote Now

More Information

Request A Quote