Lab & Testing Equipment Accessories

0 to 4 bar (ABS) in-mould pressure sensor designed to provide in-mould feedback control to CIJECT injection/infusion machines. Used with either 12 mm or 15 mm IMPS adaptors.

Sensor cable used to connect a sensor with a MIL-spec connector directly to a CIJECT machine IMPS input or an IMPS Readout Unit. Connectors include 3–pin IMPS plug to 6–pin MIL-spec socket. 3/10/25 metre lengths available.

Reusable clamp mechanism designed to shut off resin feed lines by compressing the pipe lines. An alternative method to the isolation valve fitting, designed to improve shutting off feed lines and flow regulation.

Adaptor for an in-mould pressure sensor (IMPS) which converts 12 mm metric pipe to 3/4” BSP female thread, to connect IMPS to the infusion set-up.

Adaptor for an in-mould pressure sensor (IMPS). Fitting converts 15 mm metric pipe to 3/4” BSP female thread to connect IMPS to the infusion set-up.

Stainless steel insert for an in-mould pressure sensor (IMPS). Insert comes with O-ring, seal and lock-nut for connecting and securing a sensor through a vacuum bag.

12 mm infusion fitting for use with DIADRAIN microporous material as a vacuum channel.

12 mm insert designed for use in direct infusion. Situated underneath vacuum bagging film, it is used to connect to 12 mm pipe through the vacuum bag to create a resin feed.

12 mm insert used in direct infusion. For use with spiral wrap, the insert is situated underneath vacuum bagging film and connects to 12 mm pipe through the vacuum bag to create a resin feed line.