Direct Infusion Accessories

Large pipe cutters for easy cutting of pipes and reinforced PVC hoses.

High tenacity economic peel ply designed to be used on epoxy and polyester composite systems. The fabric leaves a fine surface impression for priming and secondary bonding.

High tenacity standard and economic one side adhesive peel ply designed to used on epoxy and polyester composite systems. The fabric simplifies the implementation of peel ply on vertical surface or on dry fibres.

High tenacity standard peel ply, designed to be used on epoxy, vinylester and polyester composite systems.

Knitted net bleeder with high porosity, allowing good air and resin flow. Recommended for large part and high-speed flow infusion processes, with polyester, vinylester or epoxy resins.

Perforated release film 1.6 m wide, allows excess resin and can be used for high temperature infusion processes up to 160°C. Recommended for use in Direct Infusion using polyester or epoxy resins.

Multi-layer material consisting of a release film with net bleeder on top, combined into a two layer unit. Recommended for use in Direct Infusion processes.

DIADRAIN (50 mm in length) consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester sleeve, works as a resin supply or vacuum channel.

Peel ply (50 mm in length) designed to stop excess resin as it reaches the material for higher quality finish. Can be placed around a mould instead of spiral pipe during the Direct Infusion process.

Consists of a mesh material with a spiral tube in order to optimise the resin distribution and avoid the marking of the laminate of a mould.

12 mm ID x 14 mm OD clear tubing used as a vacuum channel in vacuum infusion processes.

Advanced copolymer vacuum film, non-porous and styrene resistant which can be used in direct contact with resin. To be used for either VRTM or Direct Infusion processes.

Advanced copolymer vacuum film, non-porous and styrene resistant which can be used in direct contact with resin. To be used for either VRTM or Infusion processes up to 120°C, allowing moulding of complex forms.

High temperature vacuum bagging film, non-porous and styrene resistant with considerable heat stability. To be used for either VRTM or Infusion processes, recommended for advanced composite fabrication.

Economic sealant tape designed for use on composite or metallic tools for infusion processes.

Economic sealant tape recommended for high temperature cures up to 205°C. Designed for use on composite or metallic tools for infusion processes.

25 mm (wide) film tape coated with high performance silicone adhesive, used for securing vacuum bagging film in place.

High density pipe 10 mm ID x 12 mm OD used as a resin distributor or vacuum line.

High density pipe 12 mm ID x 15 mm OD used as a resin distributor or vacuum line.